Netpro Professional Road/Channel/Dam Design
DESCRIPTION:
It is a module that facilitates the preparation of all volume projects such as field surveys, highways, expressways, forest roads, city crossings, railways, airports, seaports, dams, road pavements and road renewal, tunnels and underpasses, open mining, build-up areas planning and excavations. It is in conformity with AASHTO standards. With Netpro 6.0 many features have been added and existing features have been developed.
GENERAL FEATURES:
Turkish, English support
Complies with AASHTO standards and Turkish National regulations
Support for different Unit Systems (ISO, Imperial etc.)
Programmable and Developable Structure
User defined Reporting System
Versioning, backup, benchmark and time comparisons of stored projects with advanced project management
Parameterization (measurement & metric) support for project performance calculations. Project selection, using these metric parameters collected from the projects, with many criteria such as; most feasible, lowest cost, fastest route, shortest project duration, most economic etc.
Auto update feature with intelligent road objects in case of any project change.
Auto updating cross-section and platform definitions in case of any terrain model or alignment change.
Unlimited number of user-defined layers and unlimited number of cross-sections.
Continuity of work on projects while concurrently running editors; Alignment, Vertical, Cross-section, and possibility of tracing plan and profile relation with chainage.
Entirely renewed platform and scarp settings mechanism. Automatic and concurrent generation of tens of road layers by setting Type Section for different kilometer intervals. Automatic pavement settings interrelated to road platforms.
Alignment Definitions
Interactive horizontal and vertical alignment design tools.
Horizontal/Vertical relational trace on chainage during design process.
Transformation of imported data from terrain model (line, arc, point, spiral) to axis information.
Complying with AASHTO, automatic calculation and application of; curve radius, curve length, speed, superelevation, spiral application requirements, valley/hill vertical requirements.
Incompatibility Reports (conditions not complying AASHTO standards) and automatic correction method suggestions.
Automatic solution suggestions for non-standard conditions. Short alignments, combined curves, short curve cases are automatically solved, complying with the regulations.
utomatic or manual superelevation definition. Automatic superelevation is calculated either with AASHTO standard parameters or user defined project parameters. For exceptional sections (interchanges, junctions with elevation change etc.) superelevation parameters may be set manually.
Parabolic and circular vertical curve definitions.
Horizontal and vertical curve overlap reports.
Full automatic project elevation design. With our distinctive algorithm fully automatic project elevation designing is possible, using min/max slope or most feasible slope criteria, to minimize the cut and fill works.
During all processes manual user interference is possible.
Platform and Scarp (Slope) Definitions
Automatic and concurrent generation of tens of road layers with relations by new type section editor.
Defining different platform types in the same settings with kilometer interval based type sections defined under new type section editor.
Variable road geometry definitions with horizontal and vertical transition curve settings.
Transition curve and superelevation settings from graphics.
Defining type-sections for tunnel, pipe, channel etc.
Defining all dam body sections with all layers.
Easily defining Piled Scarp, Ditch and Wall settings with intelligent editors.
Interactive generation of tunnel and pipe definitions.
Dependant settings on a finished road or surface data
In the interchange and park projects, elevation move and automatic transition curve settings are defined and designed in 3D with new Elevation Move editor.
Automatic scarp applications to fill scarp heights conforming defined regulations. Automatic analyses from the Investigation Report scarps.
Automatic Widening calculations conforming AASHTO standards.
Automatic head and toe ditches, standard drainages, ditch pavements, shoring walls and retaining walls.
Reading coordinate, chainage and superelevation data from generated road surface.
Excavation plan generation for works such as; construction foundations, dumpsites, opencast mining sites etc.
Terrain Model and Cross-sections
Using Netsurf module easily handling works such as; all types of terrain modeling, geodesic calculations, coordinate geometry calculations and topographic mapping.
Cross Section creation tools using terrain model and many other options. Using these tools it is possible to create new layers from many different data; TIN, point, broken line, another road etc.
Classical section data input and Total Station support
Rich cross section features. Tools for automatic or semi-automatic creation of Abrasion, Tooth Cut, Grade, Subgrade, Scarp Laying and Snow Plough layers.
TIN model Creation of finished road design. This TIN model can be applied to the terrain model and final TIN model of the design can be obtained. This model is useful for 3D simulations and interchange/crossroad designs.
Creation of cross-section drawings and tables for construction works.
Volume Works and Calculations
Area and volume calculations in multiple stage grounds are made.
Volume calculations for ditches, head/toe ditches.
User defined volume table design. Exporting volume tables to MS Excelฎ.
Volume calculations for progress payments, from any elevation and layer.
Volume calculation control possibility for supervising engineers, at any time of application.
Automatic Bruckner balancing (Mass-Haul) and drawing. Print outs for Earthwork and transportation volume table (for payment), Bruckner summary report.
Quantity and tables for traffic signs and structures as; Ditches, walls, grading, road structures, fortifications, curbstones and expropriation mark stones etc.
Structure tables and quantities are automatically generated from cross section drawings.
Drawing Works and Reports
Entirely renewed Plan and Profile mapping process. Automatic presentation of instant changes with Dynamic Plan and Profile map sheets.
Plan-profile and rollout drawings with Raster base.
Automatic cross section drawings and detailed cross section information on drawings (open cut, filling areas etc).
Profile drawings, conforming the regulations. All kinds of object presentations on profile, such as; elevation values, chainage, Bruckner values, lane widths, scarp slopes, RS points, piled scarp drawings, retaining wall, ditch pavement, construction works drawings etc. These objects can be added automatically or manually.
Plan drawing with scarp and elevation, conforming the regulations.
Automatic drawing features generation (color, layer etc.) with Elevation Library. Automatic conformity of all drawings to user defined standards.
Automatic preparation of sketches (horizontal, vertical, and superelevation etc.) and presentation on profile or any desired place.
Application table and many other reports for horizontal and vertical alignment.
Click on an image to view a larger version.
Turkish,
English
Supported Technologies
Windows 95/98/ME,
Windows XP/2000/NT
Software
Click on a technology to view similar products within this category.
Pricing
Users (# of seats)
musa.semerci@netcad.com.tr
+905542499972
Please call for pricing...
Additional Product Information