Finite Element Analysis (FEA) Software (11-20 of 46)

Used for applications such as clutches, solenoids, motors, sensors, actuators, loudspeakers, transformers, magnetic shielding, circuit breakers and fuel injectors, AMPERES’ calculations include force, torque, flux linkage and inductance.

Used for applications such as induction motors, recording heads, non-destructive testing, charging fixtures and transformers, OERSTED’s calculations include force, torque, flux linkage, induced voltage, power, impedance and skin effects.

Used for high frequency applications such as antennas, EMC/EMI problems, microstrip power dividers and filters, power bus structures, waveguide filters and transitions, scattering from dielectric bodies and conductors. SINGULA’s calculations include near and far field results, specific absorption...

Used for applications such as cooling fins, heat sinks, chip packaging, and motor cooling, coupled analysis is obtained with CELSIUS by using the electromagnetic power loss or force output as input for thermal analysis.

PERMAS is a general FEA software for analyses in mechanics, acoustics, thermodynamics, electrodynamics, and optimisation. PERMAS is fully parallilised for all analysis types on shared and distributed memory machines.

Used for applications such as cooling fins, heat sinks, chip packaging, and motor cooling, KELVIN also provides coupled analysis with OERSTED, IES’ 2D/RS eddy current field solver.

Used to analyze stress and strain of mechanical components and systems, ELASTO’s calculations include displacement and stress field values.

Temperature dependant elastic modulus, thermal expansion, thermal conductivity database.

GamBet is a unified system for 2D/3D Monte Carlo simulations of radiation transport in matter. Applications include optimization of X-ray targets, electron-beam heating, radiographic imaging, positron physics, radiation therapy research and shielding design.

Two-dimensional finite-element solutions for electromagnetics. Applications to electrostatics, magnet design, thermal transport, charged-particle devices, permanent magnet assemblies, electromagnetic radiation, microwave devices, pulsed power systems and RF heating of biological media.