PartMaker CAD/CAM Software
PartMaker is a Windows-developed CAM system for programming CNC Mills, Lathes, Turn-Mill Centers, Wire EDM and Swiss-type lathes.
English
Supported Technologies
Windows 95/98/ME,
Windows XP/2000/NT
Click on a technology to view similar products within this category.
Pricing
Module
3,000 to 10,000
imcs@partmaker.com
215-643-5077
Additional Product Information
PartMaker applies a Patented Visual Programming approach to make CNC programming quicker and easier. PartMaker is a Windows-developed CAM system that utilizes Knowledge Based Machining to greatly reduce part programming time – 70% in fact, versus competing systems. PartMaker is priced cost effectively to allow shops of all sizes to benefit from the productivity increase it offers.
PartMaker Mill
Automates repetitive operations such as making holes, slots and pockets. Optimizes machining time for multi-piece setups, tombstone fixtures, and 4th Axis Indexers.
PartMaker Turn
Achieves measurable time savings in lathe programming. Verifies every step of the programming process visually to prevent errors and tool collisions.
PartMaker Turn-Mill
Simplifies programming of lathes equipped with live tooling, C-axis and Y-axis. Automatically synchronizes multi-turret and multi-spindle machining
PartMaker SwissCAM
PartMaker SwissCAM is the world leader in the programming of CNC Swiss-type lathes.
PartMaker Wire EDM is an intutive solution for programming your Wire EDM. The software supports 2-axis, 2-axis with taper and full 4-axis Wire EDM cutting. PartMaker Wire EDM uses Knowledge Based Machining technology to store information about various wires, materials and cutting strategies for passes involving both rough and skim cuts. The software allows you to assign your machining strategies to part geometry by just pointing and clicking. Tapers can be adjusted with just the click of the mouse. PartMaker Wire EDM provides an accurate time study for your EDM parts and allows you to simulate cutting in dynamic 3D graphics on screen.