Microelectronics and Electronics Software (1-10 of 35)

DipTrace is an affordable PCB Design Solution with easy-to-learn user interface. It includes Schematic Capture, PCB Layout with powerful autorouter, Component Editor, Pattern Editor

ScanINSPECT VPI is a fully integrated, stand-alone process control, measurement, inspection and programming workstation for use in setting up processes before the production floor or performing sampling inspection once a product is in production in the PCB or Hybrid Microcircuit assembly...

ScanSTENCIL is a fully integrated, stand-alone process control, measurement and inspection workstation for use after solder paste stencil and hybrid emulsion screen fabrication or other machined, etched or laser cut operations.

ScanFAB is a fully integrated, stand-alone PCB reverse engineering system designed to create the needed Gerber data, drill files, and DXF data from existing printed circuit boards, artwork, film for today’s automated production environments

ScanPLACE provides a sophisticated and user-friendly alternative to complex CAM software packages and inaccurate, time consuming manual inspection and programming methods that cost assembly houses productivity, time and money.

Makes custom printed circuit boards with components completely via the Internet. Includes free software for PCB design and online pricing. Offers convenience and low cost.

Intelic Software provides the e-business infrastrucutre for electronic component manufacturers looking to automate the sales channel. Using ProChannel, Intelic's web-based business to business (B2B) solution, manufacturers can enable communuincations and transactions with any or all of their direct...

The main goal of the one-dimensional SELES code is to make a bridge from MOVPE growth receipts to the characteristics of light-emitting diodes (LEDs) based on a group-III nitride heterostructures. Basically, the LED heterostructure consists of the n- and p-emitters, separated by a single or...

FLOTHERM Electronics Cooling Software uses powerful Computational Fluid Dynamics (CFD) techniques to predict air flow and heat transfer in and around electronic components, heat sinks, boards, and complete systems. FLOTHERM is the world's leading thermal analysis software for the electronics...

SPIRAL is a three-dimensional program for the design, characterization and optimization of etched spiral inductors on silicon, GaAs, ceramic, MCMs and PCBs.

A program for optimizing the design of VLSI power distribution I/O rings. Common problems of ground bounce and simultaneous switching noise are easily debugged and solutions found by fast turn around what-if analysis.

A very fast and accurate 3-D inductance simulator which calculates self and mutual inductance of any interconnect structure in electronic media.

A unique program for the fast design, analysis and optimization of high performance SRAM arrays.

CELL-AN is a three-dimensional level SPICE extraction tool which generates significant RCLK, S/D resistances, and geometry dependent transistor SPICE model parameters.

P-PLAN is a VLSI power distribution network floorplanning tool used with P-GRID.

NET-AN is a three-dimensional IC multi-net analysis tool for extracting distributed RCLK SPICE networks from critical IC nets.

A power network analysis tool which extracts power network parasitics and solves them for low voltage violations and current density violations.

A 2D/3D interconnect simulator for extracting RCL parasitics from interconnect structures. It features automatic mesh generation, refinement, and SPICE sub-circuit generation.

A VLSI floorplanning tool for the fast design and optimization of clock networks at the block or full chip level.

Register & Memory Management Effective HW/SW integration software for System-on-Chip (SoC) development teams.

Bandgap Engineering Superlattice Simulation Tool (BESST) is designed for simulation of optoelectronic devices based on group-III nitride superlattices (SLs). The BESST package allows calculating of individual SL properties as well as modeling of band diagram and carrier transport in a device...

The software tool, Simulator of Light Emitters based on Nitride Semiconductors (SiLENSe), is offered for modeling band diagrams and characteristics of light emitting diodes (LEDs) based on group-III nitrides. The SiLENSe software provides researchers with exhaustive information about complex...

Adds fixed-point data-types to C and C++. Provides bit-accurate modeling of fixed-point data-types (supporting any width and precision) and bit-accurate modeling of overflow and quantization behavior. A|RT Library supports C++ template mechanism and full operator-overloading for extreme...

Modeling and simulation package for Power Electronics and Electrical Drives. Multilevel modeling of electronics, control, electrical machines, load, hydrolics and export of embedded C code for embedded software.

Cimnet Systems, Inc. develops, markets, and supports a S/ERP (specialized enterprise resource planning) application software called Paradigm® that is used by PCB manufacturers for the real time control of their operations.

New timing based on IR drop

RTL power grid design and IR drop analysis

A power router for power mesh reliability closure

Cetec Software has specialized in solving the data processing requirements for the Electronic Distribution industry since 1981. The company is formed by talented people rich in experience, having worked in all phases of distribution.

RealPower Solution ANALYZE power using the actual test vectors. FIND reliability problems (electromigration, hot spots & IR drop) fast and FIX reliability issues using the built-in Power Mesh Design feature.

Board level testability analysis tool. Speeds time to market. Minimizes test points, thereby saving test equipment and fixturing costs. Increases potential fault coverage.

Automatic test generator for programmable logic devices, including EPLDs and FPGAs. Also test generation and modification of boundary scan tests and BSDL files.

This was an early system for specifying formal designs of computing systems and proving their correctness.

This tool has been used to perform proofs of correctness of complex hardware and software systems, including floating point hardware in commercially available microprocessors.